Groundbreaking for a New Steel Plant in Indonesia
A new steel plant in Indonesia has broken ground, with one continuous color coating line and one continuous galvanizing line.
Coordinating the two lines and site interfaces
Civil works and utilities for both lines must be coordinated across the site. This includes the annealing-furnace and zinc-pot foundations for the CGL, exhaust treatment for the CCL curing ovens, corrosion-resistant flooring in the pretreatment areas, and shared incoming and finished-coil logistics.
A local architectural and engineering firm undertakes building design. PRC provides line-side process conditions, foundation loads and interface information. Exhaust points and utility interfaces are coordinated during overall layout planning.
Color coating and galvanizing configuration
The CCL coating and curing sections are configured for primer, finish and back-coat systems. The CGL arrangement includes annealing, the zinc pot, air knives, cooling, skin passing and tension levelling. Exhaust and ventilation interfaces for both lines are coordinated at the layout stage to avoid later alterations to completed civil works.
Next steps
Following groundbreaking, foundation construction and equipment manufacturing proceed in parallel. PRC will provide foundation-condition drawings, interface lists and manufacturing progress at the agreed milestones, working with the owner and designers on technical clarifications before shipment and installation.
Project facts
| Location | Indonesia |
|---|---|
| Groundbreaking | 3 September 2026 |
| Lines | Continuous color coating line (CCL) and continuous galvanizing line (CGL) |
| PRC scope | Process concept, foundation and interface information, equipment supply and integration |
Site photographs
The customer name and exact site address are omitted to protect customer information. The scope described here introduces PRC’s involvement; the final supply scope and technical requirements are governed by the formally agreed project documents.
Frequently asked questions
What lines does the project include?
One continuous color coating line (CCL) and one continuous galvanizing line (CGL), with associated utilities and environmental systems.
What is PRC’s scope?
Process concept, foundation loads and interface information, equipment supply and integration, exhaust and environmental interface coordination, and installation, commissioning and training support.