Products

Steel Strip Cold Rolling Mill (CRM)

Single- or two-stand reversing mills and four- to six-stand tandem mills, with selection data and a technical questionnaire.

Acid Regeneration Plant

Acid regeneration for wasteacid, selected to suit the wasteacid composition.

Steel Strip Color Coating Line (CCL)

Continuous decorative and protective coating of cold-rolled or galvanized strip for building envelopes, appliances and industrial equipment.

Strip width 600–2000 mm · Strip thickness 0.18–1.6 mm

Surface preparation → Coating application → Baking / curing → Cooling & exit handling

Steel Strip Tension Leveling Line (TLL)

Strip tension leveling and finishing, including side trimming, oiling and recoiling configurations.

Steel Strip Temper Mill (TM)

Four-high temper rolling for steel strip finishing.

Non oriented Electrical Steel Annealing Line

Annealing equipment for non-oriented electrical steel strip.

Stainless Steel Bright Annealing Production Line

Continuous bright annealing equipment for stainless steel strip.

Steel Strip Push & Pull Pickling Line (PPL)

Steel Strip Continuous Annealing Line (CAL)

Bell Annealing Furnace

Steel Strip Electrolytic Tinning Plate Line (ETL)

Steel Strip Hot Dip Galvanizing Line (CGL)

Continuous hot-dip and alloy coating of steel strip, covering cleaning, reducing annealing, coating, cooling, temper rolling and tension levelling. Galvanizing, galvalume and zinc-aluminium-magnesium coating require product-specific coating chemistry and equipment configuration.

Strip width 600–1800 mm · Strip thickness 0.15–6.0 mm

Cleaning & surface preparation → Reducing annealing → Hot-dip coating & coating control → Cooling → Temper rolling & tension levelling

Steel Coil Slitting Line

Uncoils wide metal coil, slits it longitudinally into narrow strips and recoils the strips for downstream tube making, forming and narrow-strip applications.

Material thickness 0.15–4.0 mm · Material width 300–2000 mm

Uncoiling → Rotary slitting → Strip recoiling

Steel Coil Cut-to-Length Line

Uncoils, levels and transversely cuts metal coil into fixed-length sheets, then stacks the sheets for downstream processing.

Material thickness 0.5–4.0 mm · Material width 300–1800 mm

Uncoiling → Levelling → Shearing to length → Sheet stacking

Recoiling Line

Recoiling and finishing of steel strip.

Roofing Sheet Making Machine

Roll forming of roofing and wall-cladding sheet profiles.

Highway Guardrail Making Machine

Roll forming for two-wave and three-wave highway guardrail profiles.

C / Z / U Purlin Making Machine

Cold roll forming of C, Z and U profiles from steel strip.

ERW Pipe Mill

High-frequency welding converts hot-rolled, cold-rolled or galvanized strip into round, square and rectangular tubes for construction, transport, machinery and automotive applications.

Round tube diameter Ø7–Ø273 mm · Wall thickness 0.18–10 mm

Strip feeding → Roll forming → High-frequency welding → Cooling & sizing → Cut-to-length & discharge

SSAW Pipe Mill

Spiral forming and submerged arc welding of steel pipe from coil.

Steel Wire Galvanizing Line

Pretreatment, zinc coating, cooling and post-treatment of steel wire.

H-Beam Making Machine (Submerged Arc Welded)

Submerged arc welding equipment for welded H-beam production.

Steel Wire Drawing Machine

Wire diameter reduction through successive drawing dies, with feeding and take-up systems.

Steel Pipe Hot Dip Galvanizing Line

Immerses surface-prepared black steel pipes in molten zinc to coat both internal and external surfaces. Designed for finished pipes, with a material format and equipment arrangement distinct from continuous strip galvanizing.

Provide the diameter range, wall thickness, pipe length, unit weight and annual output so the equipment size, production cycle and layout can be selected.

Surface preparation → Drying & heating → Zinc immersion → Extraction, lifting & blowing → Cooling & finishing

Steel Strip Hot Dip Galvanizing Line (CGL)

Continuous hot-dip and alloy coating of steel strip, covering cleaning, reducing annealing, coating, cooling, temper rolling and tension levelling. Galvanizing, galvalume and zinc-aluminium-magnesium coating require product-specific coating chemistry and equipment configuration.

Strip width 600–1800 mm · Strip thickness 0.15–6.0 mm

Cleaning & surface preparation → Reducing annealing → Hot-dip coating & coating control → Cooling → Temper rolling & tension levelling

Centrifugal Galvanizing Equipment

Zinc immersion and centrifugal removal of excess zinc for small metal parts.

Hanging Hot Dip Galvanizing Equipment

Batch hot dip galvanizing for structural steel and fabricated workpieces.

Steel Wire Galvanizing Line

Pretreatment, zinc coating, cooling and post-treatment of steel wire.